Theron Sowers Apr 6, 10:45 a.m. |
Please complete San Ardo Buffer Zone then Round Mountain 2. Thanks! |
1 open, 0 underway, 5881 closed Description Elk Hills wells
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
139 open, 2 underway, 0 closed Description Any well with an LAS file.
Instructions For each g-log curve, enter its name from the LAS file if it exists.
0 open, 0 underway, 279 closed Description North Coles Levee wells
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 249 closed Description Wells from Lost Hills of depth 2300 feet or greater.
Instructions Add run headers for SP and resisitivity curves. (Mud properties affect the interpretation of these curves.) Skip run headers for porosity logs.
0 open, 0 underway, 793 closed Description Geophyscial log catalog ONLY. Fill Runs and curves
Instructions Create runs and enter run metadata, g-log metadata, and temperature and mud observations. Do not enter any well metadata.
0 open, 0 underway, 1711 closed Description Collect all metadata, well construction, runs, etc.
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 249 closed Description Wells from Lost Hills of depth 2300 feet or greater.
Instructions (1) Add well metadata and log curve descriptions.
(2) QC run headers for SP and resistivity curves.
— Make sure runs account for the total length of the well.
— When a mud resistivity measurement is at BHT, enter bottom hole depth for it.
– Run headers often continue off to the right, where there are extra mud resistivity measurements (example: 02984218).
0 open, 0 underway, 8560 closed Description Wells from Chevron with corresponding already digitized logs.
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 5823 closed Description Elk Hills wells
Instructions Well construction data was imported from SharePoint, and may conflict with what was already in this database. Look for change log entries with CONFLICT and resolve each conflict. Make a note in the change log if there is an interesting reason for the conflict.
0 open, 0 underway, 962 closed Description Enter full well construction data and glog data.
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 5380 closed Description Geophyscial log catalog ONLY. Fill Runs and curves.
Instructions Create runs and enter run metadata, g-log metadata, and temperature and mud observations. Do not enter any well metadata.
0 open, 0 underway, 210 closed Description 210 wells, to begin with, in Kern River.
Instructions Add well construction data and run data. Ignore run metadata fields that are disabled.
0 open, 0 underway, 156 closed Description Basic well construction data
Instructions Add well construction data and run data. Ignore run metadata fields that are disabled.
0 open, 0 underway, 719 closed Description Orcutt wells in SharePoint
Instructions Well construction data was imported from SharePoint, and may conflict with what was already in this database. Look for change log entries with CONFLICT and resolve each conflict. Make a note in the change log if there is an interesting reason for the conflict.
0 open, 0 underway, 962 closed Description QC completed wells in the Placerita field
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 56 closed Description These APIs are directly associated with Produced Geochem
Instructions Add well construction data and run data. Ignore run metadata fields that are disabled.
0 open, 0 underway, 799 closed Description 799 Elk Hills wells, either (1) within 400 m and 20 years of a geochem measurement or (2) within 800 m of a fresh (TDS < 15000 ppm) geochem measurement.
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 2947 closed Description QC all of the San Ardo data
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 2970 closed Description Collect all well construction and geophysical log data as per usual.
If you encounter an API with data already filled out, close the log. It has been done before and QC'd already.
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 59 closed Description Only complete well construction on these APIs
Instructions Add well construction data and run data. Ignore run metadata fields that are disabled.
0 open, 0 underway, 2970 closed Description QC for PC Revisited
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 226 closed Description Elk Hills wells of two sorts: (1) those in Jan's geochem table, and (2) nearby wells with LAS files.
Instructions Add run headers for SP and resisitivity curves. (Mud properties affect the interpretation of these curves.) Skip run headers for porosity logs.
0 open, 0 underway, 70 closed Description QC with a focus on top and bottom perf.
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 793 closed Description All Orcutt wells
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 413 closed Description Geophyscial log catalog. Fill Runs and curves.
Instructions Create runs and enter run metadata, g-log metadata, and temperature and mud observations. Do not enter any well metadata.
0 open, 0 underway, 279 closed Description Geophyscial log catalog ONLY. Fill Runs and curves.
Instructions Create runs and enter run metadata, g-log metadata, and temperature and mud observations. Do not enter any well metadata.
0 open, 0 underway, 1711 closed Description QC all Buena Vista APIs
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 365 closed Description Oxnard wells
Instructions Well construction data was imported from SharePoint, and may conflict with what was already in this database. Look for change log entries with CONFLICT and resolve each conflict. Make a note in the change log if there is an interesting reason for the conflict.
0 open, 0 underway, 413 closed Description Oxnard wells
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 276 closed Description 278 North Coles Levee wells
Instructions Well construction data was imported from SharePoint, and may conflict with what was already in this database. Look for change log entries with CONFLICT and resolve each conflict. Make a note in the change log if there is an interesting reason for the conflict.
0 open, 0 underway, 531 closed Description QC all well construction and header information. Do not worry about glogs.
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).
0 open, 0 underway, 425 closed Description Enter the following fields:
Well Construction: All Fields
Run Fields: Service company, Tool, Date, Run number, Driller depth, Logger depth, Log bottom, Log top, Notes, Temperature and Resistivity data.
Do not enter curve names.Instructions Add run headers for SP and resisitivity curves. (Mud properties affect the interpretation of these curves.) Skip run headers for porosity logs.
0 open, 0 underway, 499 closed Description Enter all information, including g-log catalog. For g-logs, we are only looking for:
*SP
*GR
*All available resistivity
*All available porosity
*Bit
*Caliper
*TemperatureDo not log anything else.
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 1525 closed Description Enter all metadata
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 1373 closed Description Enter all metadata
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 236 closed Description Collect run headers only
DO NOT COLLECT:
WELL CONSTRUCTION (NO PERFS, SPUD DATES, DEPTHS)
GLOG CATALOG (NONE)Instructions Add run headers for SP and resisitivity curves. (Mud properties affect the interpretation of these curves.) Skip run headers for porosity logs.
0 open, 0 underway, 531 closed Description Enter metadata, run header, and temperature. No glog catalog
Instructions Add well construction data and run data. Ignore run metadata fields that are disabled.
0 open, 0 underway, 263 closed Description Enter all metadata. No glog catalog required.
Instructions Add well construction data and run data. Ignore run metadata fields that are disabled.
0 open, 0 underway, 68 closed Description I need well construction data, run headers, g-log curve names, and temperature and mud resistivity observations
Instructions Enter:
(1) Well metadata for each well, if missing.
(2) Run metadata for each run.
(3) Log curve descriptions for each run.
(4) Temperature and resistivity observations for each run.
0 open, 0 underway, 68 closed Description Detail QC for all entries
Instructions QC all data (well construction, run header, g-log curves, mud/temperature).