(1) Add well metadata and log curve descriptions.
(2) QC run headers for SP and resistivity curves.
— Make sure runs account for the total length of the well.
— When a mud resistivity measurement is at BHT, enter bottom hole depth for it.
– Run headers often continue off to the right, where there are extra mud resistivity measurements (example: 02984218).
This task is closed and unheld.
Name | |
Spud date | 2012-02-29 |
Abandon date | |
Borehole orientation | Directional |
Measured depth | 2065.000 |
True vertical depth | |
Tperf | 1364.000 |
Bperf | 1957.000 |
Water geochem | |
No well data | |
Glog unavailable | |
Notes | Active OG |
Service company | Schlumberger |
Tool | TRIPLE COMBO AIT/TLD/HGNS/HSTS |
Date | 2012-03-02 |
Run number | ONE |
Driller depth | 2065.000 |
Logger depth | 1968.000 |
Log bottom | 1960.000 |
Log top | 407.000 |
Casing size | 9.625 |
Bit size | 8.750 |
Mud type | GEL/DMA |
Mud density | 10.50 |
Mud visc (plastic) | |
Mud visc (funnel) | 40.00 |
Mud ph | 7.90 |
Mud fluid loss | 5.20 |
Sample source | MUD TANK |
Circulation stopped time | 08:00:00 |
Logger on bottom time | 11:39:00 |
Time since circulation | |
Operating rig time | |
Notes |
1437 | 2017-08-09 14:27 | dakota | CLOSED, UNHANDED |
1437 | 2017-08-09 14:26 | dakota | EDITED RUN ONE (March 2, 2012) |
1437 | 2017-08-09 14:25 | dakota | EDITED RUN ONE (March 2, 2012) |
1437 | 2017-08-09 14:20 | dakota | EDITED WELL METADATA |
1437 | 2017-08-09 14:18 | dakota | TAKEN |
1437 | 2017-08-02 16:45 | whdc | TASK CREATED |
1179 | 2017-06-29 09:54 | dakota | CLOSED, UNHANDED |
1179 | 2017-06-29 09:54 | dakota | EDITED RUN ONE (March 2, 2012) |
1179 | 2017-06-29 09:54 | dakota | ADDED RUN ONE (March 2, 2012) |
1179 | 2017-06-29 09:53 | dakota | TAKEN |
1179 | 2017-06-24 13:48 | whdc | TASK CREATED |
Well 03046173