(1) Add well metadata and log curve descriptions.
(2) QC run headers for SP and resistivity curves.
— Make sure runs account for the total length of the well.
— When a mud resistivity measurement is at BHT, enter bottom hole depth for it.
– Run headers often continue off to the right, where there are extra mud resistivity measurements (example: 02984218).
This task is closed and unheld.
Name | |
Spud date | 2010-01-13 |
Abandon date | |
Borehole orientation | Directional |
Measured depth | 2360.000 |
True vertical depth | |
Tperf | 1970.000 |
Bperf | 2188.000 |
Water geochem | |
No well data | |
Glog unavailable | |
Notes |
Service company | Schlumberger |
Tool | TRIPLE COMBO AIT/TLD/HGNS/HSTS |
Date | 2010-01-15 |
Run number | ONE |
Driller depth | 2360.000 |
Logger depth | 2362.000 |
Log bottom | 2354.000 |
Log top | 254.000 |
Casing size | 9.625 |
Bit size | 8.750 |
Mud type | GEL/DMA |
Mud density | 9.20 |
Mud visc (plastic) | |
Mud visc (funnel) | 37.00 |
Mud ph | 8.20 |
Mud fluid loss | 5.60 |
Sample source | MUD TANK |
Circulation stopped time | 11:00:00 |
Logger on bottom time | 14:17:00 |
Time since circulation | |
Operating rig time | |
Notes |
1561 | 2017-08-10 10:50 | dakota | CLOSED, UNHANDED |
1561 | 2017-08-10 10:50 | dakota | EDITED WELL METADATA |
1561 | 2017-08-10 10:48 | dakota | EDITED RUN ONE (Jan. 15, 2010) |
1561 | 2017-08-10 10:47 | dakota | EDITED RUN ONE (Jan. 15, 2010) |
1561 | 2017-08-10 10:46 | dakota | EDITED RUN ONE (Jan. 15, 2010) |
1561 | 2017-08-10 10:41 | dakota | EDITED WELL METADATA |
1561 | 2017-08-10 10:40 | dakota | TAKEN |
1561 | 2017-08-02 16:45 | whdc | TASK CREATED |
1055 | 2017-06-27 10:53 | dakota | CLOSED, UNHANDED |
1055 | 2017-06-27 10:53 | dakota | EDITED RUN ONE (Jan. 15, 2010) |
1055 | 2017-06-27 10:53 | dakota | ADDED RUN ONE (Jan. 15, 2010) |
1055 | 2017-06-27 10:50 | dakota | TAKEN |
1055 | 2017-06-24 13:48 | whdc | TASK CREATED |
Well 03039732