(1) Add well metadata and log curve descriptions.
(2) QC run headers for SP and resistivity curves.
— Make sure runs account for the total length of the well.
— When a mud resistivity measurement is at BHT, enter bottom hole depth for it.
– Run headers often continue off to the right, where there are extra mud resistivity measurements (example: 02984218).
This task is closed and unheld.
Name | |
Spud date | 2007-11-07 |
Abandon date | |
Borehole orientation | Vertical |
Measured depth | 2520.000 |
True vertical depth | 2520.000 |
Tperf | 1380.000 |
Bperf | 2320.000 |
Water geochem | |
No well data | |
Glog unavailable | |
Notes | Injection well; Injection fluid is not confined to approved zone (2017-2-7); |
Service company | Schlumberger |
Tool | PLATFORM EXPRESS AIT/TLD/MCFL/HGNS |
Date | 2007-11-12 |
Run number | ONE |
Driller depth | 2445.000 |
Logger depth | 2400.000 |
Log bottom | 2392.000 |
Log top | 93.000 |
Casing size | 8.625 |
Bit size | 7.875 |
Mud type | SPUD MUD |
Mud density | 9.40 |
Mud visc (plastic) | 48.00 |
Mud visc (funnel) | |
Mud ph | 7.70 |
Mud fluid loss | 6.50 |
Sample source | MUD PIT |
Circulation stopped time | 04:00:00 |
Logger on bottom time | 09:20:00 |
Time since circulation | |
Operating rig time | |
Notes |
1621 | 2017-08-11 15:52 | hannaho | CLOSED, UNHANDED |
1621 | 2017-08-11 15:47 | hannaho | EDITED RUN ONE (Nov. 12, 2007) |
1621 | 2017-08-11 15:46 | hannaho | EDITED RUN ONE (Nov. 12, 2007) |
1621 | 2017-08-11 15:44 | hannaho | EDITED RUN ONE (Nov. 12, 2007) |
1621 | 2017-08-11 15:42 | hannaho | EDITED WELL METADATA |
1621 | 2017-08-11 15:33 | hannaho | TAKEN |
1621 | 2017-08-02 16:45 | whdc | TASK CREATED |
995 | 2017-06-26 14:50 | dakota | CLOSED, UNHANDED |
995 | 2017-06-26 14:50 | dakota | EDITED RUN ONE (Nov. 12, 2007) |
995 | 2017-06-26 14:50 | dakota | ADDED RUN ONE (Nov. 12, 2007) |
995 | 2017-06-26 14:48 | dakota | TAKEN |
995 | 2017-06-24 13:48 | whdc | TASK CREATED |
Well 03033484