(1) Add well metadata and log curve descriptions.
(2) QC run headers for SP and resistivity curves.
— Make sure runs account for the total length of the well.
— When a mud resistivity measurement is at BHT, enter bottom hole depth for it.
– Run headers often continue off to the right, where there are extra mud resistivity measurements (example: 02984218).
This task is closed and unheld.
| Name | |
| Spud date | 1998-03-07 |
| Abandon date | 2004-02-13 |
| Borehole orientation | Horizontal |
| Measured depth | 2891.000 |
| True vertical depth | 1584.000 |
| Tperf | |
| Bperf | |
| Water geochem | |
| No well data | |
| Glog unavailable | |
| Notes | No perfs job was suspended |
| Service company | |
| Tool | HIGH RESOLUTION IND COMPENSATED DENSITY DUAL SPACED NEUTRON |
| Date | 1997-03-09 |
| Run number | ONE |
| Driller depth | 1944.000 |
| Logger depth | 1681.000 |
| Log bottom | 1672.000 |
| Log top | 40.000 |
| Casing size | 25.000 |
| Bit size | 9.875 |
| Mud type | SP101 |
| Mud density | 8.80 |
| Mud visc (plastic) | 38.00 |
| Mud visc (funnel) | |
| Mud ph | 8.10 |
| Mud fluid loss | 6.50 |
| Sample source | PIT |
| Circulation stopped time | |
| Logger on bottom time | 15:10:00 |
| Time since circulation | 2.500 |
| Operating rig time | |
| Notes | Service company covered by barcode |
| 1676 | 2017-08-14 11:15 | hannaho | CLOSED, UNHANDED |
| 1676 | 2017-08-14 11:14 | hannaho | EDITED RUN ONE (March 9, 1997) |
| 1676 | 2017-08-14 11:14 | hannaho | EDITED RUN ONE (March 9, 1997) |
| 1676 | 2017-08-14 11:10 | hannaho | EDITED WELL METADATA |
| 1676 | 2017-08-14 11:04 | hannaho | TAKEN |
| 1676 | 2017-08-02 16:45 | whdc | TASK CREATED |
| 940 | 2017-06-26 11:38 | dakota | CLOSED, UNHANDED |
| 940 | 2017-06-26 11:37 | dakota | EDITED RUN ONE (March 9, 1997) |
| 940 | 2017-06-26 11:36 | dakota | ADDED RUN ONE (March 9, 1997) |
| 940 | 2017-06-26 11:32 | dakota | TAKEN |
| 940 | 2017-06-24 13:48 | whdc | TASK CREATED |
Well 03010656